Technology of Simple Structure, Long Durability
The F2030-K uses the laser diffraction measurement principle, providing exceptional accuracy and consistency. It is an ideal option for production lines with vibrating components or rapid wire speeds.
With a measurement repeatability of ±0.2 µm, the F2030-k is highly adaptable and suitable for diverse materials, like electric wire and cable, steel wire, 3D filament,especailly the object with high ovality measurement requirement.
Single axis sampling frequency of 5KHz
Thanks to no running parts, the sampling frequency can reach to 5KHz ,which enables to get more information of the object under measurement.
Applications
Touch Screen,Computer,Cellphone
DALA F2030-K can be controlled by computer software ,cellphone and touch screen,like parameter setting ,measurement data management ,and so on,customers can choose as their application request.
Technical Specification
| Model | F2030-K |
| Axis | 2-axis |
| Measurement data | diameter and ovality, lump and necks |
| Frequency | 5KHz/axis |
| Measurement range | 0.5~30mm |
| Repeatability(1) | ±0.2μm |
| Accuracy(2) | ±(0.001+0.01%*D)mm |
| Min defect height | 0.01mm |
| Min defect length(3) | 0.4mm(wire speed120m/min)
1.6mm(wire speed500m/min) |
| Size | 280*245*58mm |
| Working power source | 24V ±10% 40VA |
| Running temperature | 5℃~50℃ |
| Display | LED display |
| Commuincation port | Standard:WIFI,RS485 MODBUS RTU,CAN
Option:PROFIBUS,PROFINET, EtherNet/IP,EtherCAT |
| Electrical port | Standard: digital output(relay),digital input,analog input,encoder pulse input port
Option:PI feedback control (4) |
| Data colletion & analysis | available (option DS14 ZT display and control system,DMS1000) |
| Out-of-tolerance alarm | available |
| Transparent mode | available |
Note:
(1) set sliding window as 100ms, outside diameter repeatability of φ1mm round rod at measurement center area
(2) set sliding window as 100ms, outside diameter deviation of φ1mm round rod at measurement area
(3)set defect measurement average time as 0ms, the minimum defect length which cannot be missed at the measurable area
(4)PI feedback control is option, but must order at placing order
